X300 EXPANSION BOARD  for Raspberry Pi


For Use With 	 - RASPBERRY PI 3 MODEL B / PI 2 MODEL B / PI 1 MODEL B+
Operating System 	 - Raspbian Jessie...etc 
Input Voltage 	 - 6V to 18Vdc converted to 5V, 4A via step-down DC/DC converter to power the Raspberry Pi 
SATA 	 - Allows you to connect SATA devices to your Raspberry Pi   
Audio 	 - 3.5mm MIC in jack
 - 3.5mm stereo audio jack
 - SPDIF output
 - Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
Wireless 	 - WiFi (IEEE 802.11b/g/n) with external antenna
 - IR sensor (38KHz)
 - Bluetooth serial communication
USB Storage 	 - Self-powered USB hub with 3 ports 
Real-time clock (RTC)  	 -  Based on DS3231SN with included CR2032 battery
Misc 	 - Power output socket
 - Camera flex slot so camera can still be used with the expansion  board attached
 - DIP switch to remove connection from RPi’s pin header
 - Directly connected on top of the Raspberry Pi using the board GPIO header pins
 - No wiring nor soldering is required
 - Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
Dimensions 	 - 85 x 56mm (Same size as Raspberry Pi)

For More Details on PC Click here

For More Details on Portables Click here